pulled codes now what

CO CODES
23=TPS I know what to do with this one
54=Intake air temp/Air charge temp circuit open
67=Park neutral switch, pretty sure that cause I bypassed the neutral safety switch trying to figure something else out.

CM CODES
22=MAP/Barometric Pressure Sensor
54=Intake air temp/Air charge temp circuit open
66=MAF sensor signal below minimum test voltage
96=Fuel Pump Circuit Open

Couldnt do the KOER cause im still tracking down what I believe is a vac leak.

You couldn't do it because it wouldn't let you or didn't want to?

I thought to pull the koeo the car has to idle, am I mistaken?

KOEO= key on, engine off
KOER= key on, engine running

yeah, I meant koer, does engine need to idle to pull those codes or can i pull codes while giving it gas.

turn up the idle screw until it idles.

the thing I am thinking about that is, even when I am at a stop light, I cant lightly press on the gas pedal to keep it running, it will just die unless Im revving it at 1600 or more. I have to give it gas then let off, give it gas then let off.

What cam you running? Sounds like a vacuum leak.

I feel the same about it being a vacuum leak, but sprayed an entire can of starter fluid everywhere I could without a slight jump in rev. X303 cam